Configuration
7-3
BA9300POS EN 2.3
7.2.2 Set reactions
1. Click on the ”Parameter menu” button in the ”Basic settings” dialog box.
2. Open the ”Dialog Diagnostics” menu by a double-click.
Fig. 7-1 Dialog box ”Diagnostic 9300”
3. Click the button ”Monitorings...”.
Fig. 7-2 ”Monitoring configuration 93xx” dialog box
4. Click on the required monitoring function.
5. Select the possible or permitted reaction and confirm it with ”OK”.
Anoverview of the monitoring functions and the settings can be obtained from thefollowing chapter.
To Next Page
Loading...
