8400 StateLine C | Operating instructions
Before commissioning
Selection of the appropriate commissioning tool
14 L from Firmware V06.00 - DMS 1.1 EN - 11/2011
Tip!
L-force »EASY Starter« and L-force »Engineer StateLevel« are provided free of
charge in the internet. Current software can be found in the download area under
http://www.Lenze.com
.
For communication between PC and controller, the USB diagnostic adapter can be
used for instance (see the following accessories overview).
Accessories for commissioning
Version Features Product key
Keypad X400 • Menu navigation
• Backlighted graphic display for comfortably representing
information
• 4 navigation keys, 2 context-sensitive keys
•Adjustable RUN/STOP function
• Hot-plug capable
• Can be used for L-force Inverter Drives 8400 and Servo
Drives 9400
EZAEBK1001
Diagnosis terminal X400 • Keypad X400 in a robust housing
• Also suitable for installation into the control cabinet door
•incl. 2.5 m cable
• Enclosure IP20, in case of front installation in control
cabinet IP65
EZAEBK2001
USB diagnostic adapter • Input-side voltage supply via USB connection from PC
• Output-side voltage supply via the diagnostic interface of
the controller
•Diagnostic LED
• Electrical isolation of PC and controller
• Hot-plug capable
E94AZCUS
Connecting cable for
USB diagnostic adapter
2.5 m length EWL0070
5 m length EWL0071
10 m length EWL0072
To Next Page
Loading...
