Lenze E84AVSC - Monitoring

8400 StateLine C | Operating instructions
Diagnostics & troubleshooting
Monitoring
48 L from Firmware V06.00 - DMS 1.1 EN - 11/2011
7.4 Monitoring
The controller is provided with various monitoring functions which protect the drive
against impermissible operating conditions.
If a monitoring function responds,
 an entry will be made into the logbook
of the controller,
 the response (TroubleQSP, Warning, Fault, etc.) set for this monitoring function will be
triggered,
 the status of the internal device control changes according to the selected response,
controller inhibit is set, and the "DRIVE ERROR" LED on the front of the controller goes
on:
Response
Entry in the
logbook
Display in
C00168
Pulse inhibit Controller
inhibit
Acknowledgem
ent required
LED "DRV-ERR"
None OFF
Fault ;;;;;
Trouble ;;;;
(after 0.5 s)
TroubleQSP ;; ;
WarningLocked ;; ;
Warning ;;
Information ; OFF
System error ;;;;
Mains switching
is required!