from Firmware V06.00 - DMS 1.1 EN - 11/2011 L 47
8400 StateLine C | Operating instructions
Diagnostics & troubleshooting
Diagnostic/Display parameters
7.3 Diagnostic/Display parameters
Diagnostic/display parameters serve to display device-internal process factors, current
actual values, and status messages, e.g. for diagnostic purposes.
In the keypad, these parameters can be found in the Diagnostics menu:
In the »EASY Starter«, these parameters can be found on the All parameters tab in the
Diagnostics category:
Par1 8400 StateLine C
SAVE
Diagnostics
Logbook
Quick commissioning
Par1 8400 StateLine C
SAVE
All parameters
Power-on time
Current operation
Actual speed
C00051
1218 rpm
To Next Page
Loading...
