8400 StateLine C | Operating instructions
2 L from Firmware V06.00 - DMS 1.1 EN - 11/2011
Tip!
Current instructions for the contents of the product CD and information and tools for the Lenze
products are provided in the download area at
http://www.Lenze.com
Product key: Nameplate:
c Type designation
d Software version
E84 A V SC x xxx x x xx
Product range
8400 Inverter Drives
Generation
A = 1. generation
Type
V = vector-controlled inverter
Version
SC = StateLine C
Mounting type
E = installation
D = Push-trough technique
C = cold-plate technique
Power e.g.
251 = 25 x 10
1
W = 0.25 kW
222 = 22 x 10
2
W = 2.2 kW
Voltage class
2 = 230/240 V, 1/N/PE AC (0.25 ... 2.2 kW)
4 = 400/500 V, 3/PE AC (0.37 ... 45 kW)
Ambient conditions
S = standard industrial environment IE33 according to IEC 60721-3-3
V = rough environment (coated printed circuit boards)
Safety system
X = without safety technology
B = with drive-based safety "safe torque off (STO)"
The product key serves to identify delivered products by nameplate data.
The product catalogue provides information on the possible configuration to order the products.
To Next Page
Loading...
