Lenze E84AVSC - Page 44

8400 StateLine C | Operating instructions
Commissioning
Adapting the most important parameters to the drive task
44 L from Firmware V06.00 - DMS 1.1 EN - 11/2011
C00910/1
C00910/2
Max. pos. output frequency
Max. positive output frequency for all motor control modes
Setting range (min. value | unit | max. value) Lenze setting
0 Hz 1000 1000 Hz
Max. neg. output frequency
Max. negative output frequency for all motor control modes
Setting range (min. value | unit | max. value) Lenze setting
0 Hz 1000 1000 Hz