Technical data
Control terminals
Communication connection
4
51
EDS84DG752 EN 5.0
4.7.5 Communication connection
8400 motec enables communication via the fieldbuses
ƒ CANopen,
ƒ PROFIBUS,
ƒ AS interface,
ƒ EtherNet/IP,
ƒ PROFINET and
ƒ EtherCat.
The connections of the fieldbuses are always assigned to M12 plugs. The plugs are
mounted to the connection positions Ax, depending on the fieldbus.
With PROFIBUS, AS interface, PROFINET and EtherCat, the LED display at connection
position A1 indicates the bus status.
Detailed information can be found in the corresponding communication manual.
To Next Page
Loading...
Need help?
General