Lenze EtherNet/IP 8400 - Page 108

13 Parameter reference
13.1 Parameters of the communication module
108
Lenze · E84AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 10/2013 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C13006
C13010
C13011
Parameter | Name:
C13006 | Multicast IP Start Address
Data type: UNSIGNED_8
Index: 11569 = 0x2D31
Setting of the multicast IP address
Setting the IP configuration of the Inverter Drive 8400
( 42)
Setting range (min. value | unit | max. value)
0 255
Subcodes Lenze setting Info
C13006/1 239 Multicast IP start address (most significant byte)
C13006/2 64 Multicast IP start address
C13006/3 2 Multicast IP start address
C13006/4 224 Multicast start address (least significant byte)
 Read access  Write access  CINH  PLC STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C13010 | Active IP Address
Data type: UNSIGNED_8
Index: 11565 = 0x2D2D
Display of the active IP address
(Instance attribute 5 (IP Address) in the TCP/IP Interface Object (245 / 0xF5)
( 141))
Display range (min. value | unit | max. value)
0 255
Subcodes Info
C13010/1 Active IP address (most significant byte)
C13010/2 Active IP Address
C13010/3 Active IP Address
C13010/4 Active IP address (least significant byte)
 Read access  Write access  CINH  PLC STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C13011 | Active Subnetwork Mask
Data type: UNSIGNED_8
Index: 11564 = 0x2D2C
Display of the active subnetwork mask
(Instance attribute 5 (IP Network Mask) in the TCP/IP Interface Object (245 / 0xF5)
( 141))
Display range (min. value | unit | max. value)
0 255
Subcodes Info
C13011/1 Active subnet mask (most significant byte)
C13011/2 Active Subnetwork Mask
C13011/3 Active Subnetwork Mask
C13011/4 Active subnet mask (least significant byte)
 Read access  Write access  CINH  PLC STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT