EasyManua.ls Logo

Lenze EtherNet/IP 8400

Lenze EtherNet/IP 8400
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12 Error messages
12.1 Short overview of the EtherNet/IP error messages
96
Lenze · E84AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 10/2013 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12 Error messages
This chapter supplements the error list in the software manual and in the »Engineer« online help
system for the Inverter Drive 8400 by adding the EtherNet/IP error messages to the list.
12.1 Short overview of the EtherNet/IP error messages
The following table lists all EtherNet/IP error messages in the numerical order of the error numbers.
Furthermore, the preset error response and - if available - the parameter for setting the error
response are specified.
Tip!
If you click on the cross-reference in the first column, you will get a detailed description
(causes and remedies) of the corresponding error message.
Software manual/»Engineer« online help for Inverter Drives 8400
Here you will find general information on diagnostics & fault analysis and on error
messages.
Error no.
[hex]
Subject area
no.
[dec]
Error no.
[dec]
Error text Error type
(Error response)
Adjustable
in
0x01bc3100
444 12544 EtherNet/IP: Exist. connect. to 8400 lost 0: No Response -
0x01bc5531
444 21809 EtherNet/IP: Memory: No Access 1: No Response -
0x01bc5532
444 21810 EtherNet/IP: Memory: Read Error 1: No Response -
0x01bc5533
444 21811 EtherNet/IP: Memory: Write Error 1: No Response -
0x01bc6010
444 24592 EtherNet/IP: Restart by Watchdogreset 1: No Response -
0x01bc6011
444 24593 EtherNet/IP: Internal Error 1: No Response -
0x01bc6100
444 24832 EtherNet/IP: Internal Error 1: No Response -
0x01bc6101
444 24833 EtherNet/IP: Internal Error 1: No Response -
0x01bc641f
444 25631 EtherNet/IP: Invalid Parameter Set 1: No Response -
0x01bc6420
444 25632 EtherNet/IP: Error: Lenze Setting Loaded 1: No Response -
0x01bc6430
444 25648 EtherNet/IP: Invalid Configuration 1: No Response -
0x01bc6533
444 25907 EtherNet/IP: Invalid IP Parameter 1: No Response -
0x01bc8111
444 33041 EtherNet/IP: Fault Mode 1: No Response C13880/2
0x01bc8112 444 33042 EtherNet/IP: Explicit Message Timeout 0: No Response C13880/3
0x01bc8114 444 33044 EtherNet/IP: Overall Ethernet Timeout 0: No Response C13880/4
0x01bc8121 444 33057 EtherNet/IP: Ethernet cable pulled out 1: No Response -
0x01bc8132
444 33074 EtherNet/IP: Idle Mode 0: No Response C13880/1
0x01bc8273 444 33395 EtherNet/IP: Duplicate IP Address 1: No Response -

Table of Contents

Related product manuals