1 About this documentation
6 Lenze · E84AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 10/2013 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Target group
This documentation is intended for all persons who plan, install, commission and maintain the
networking and remote servicing of a machine.
Tip!
Current documentation and software updates with regard to Lenze products can be found
in the download area at:
www.Lenze.com
Information regarding the validity
The information given in this documentation is valid for the following devices:
From software version 01.02, the "AC Drive Profile" of the Inverter Drives 8400 is supported from
version V13.00.
Screenshots/application examples
All screenshots in this documentation are application examples. Depending on the firmware
version of the communication module and software version of the installed engineering tools
(»Engineer«, »RSLogix 5000«), the screenshots in this documentation may differ from the screen
representation.
Extension module Type designation From hardware
version
From software
version
Communication module EtherNet/IP E84AYCEO VA 01.01
To Next Page
Loading...
Need help?
General