Preface and general information
1-3
L MA9300PLC EN 1.4
1.4 Legal regulations
Labelling
Nameplate CE-identification Manufacturer
Lenze controllers are unambiguously
designated by the contents of the nameplate.
Conforms to the EC Low-Voltage Directive Lenze GmbH & Co KG
Postfach 101352
D-31763 Hameln
Application as
directed
93XX Servo PLC
• must only be operated under the conditions prescribed in these Instructions.
• are components
– for open and closed loop control of variable speed drives with PM synchronous motors, asynchronous servo motors or asynchronous
standard motors.
– for installation in a machine
– used for assembly together with other components to form a machine.
• are electric units for the installation into control cabinets or similar enclosed operating housing.
• comply with the requirements of the Low-Voltage Directive.
• are not machines for the purpose of the Machinery Directive.
• are not to be used as domestic appliances, but only for industrial purposes.
Drive systems with 93XX Servo PLC
• comply with the EMC Directive if they are installed according to the guidelines of CE-typical drive systems.
• can be used
– for operation on public and non-public mains
– for operation in industrial premises and residential areas.
• The user is responsible for the compliance of his application with the EC directives.
Any other use shall be deemed as inappropriate!
Liability • The information, data, and notes in these instructions met the state of the art at the time of printing. Claims on modifications referring to
controllers which have already been supplied cannot be derived from the information, illustrations, and descriptions.
• The specifications, processes, and circuitry described in these instructions are for guidance only and must be adapted to your own specific
application. Lenze does not take responsibility for the suitability of the process and circuit proposals.
• The specifications in these Instructions describe the product features without guaranteeing them.
• Lenze does not accept any liability for damage and operating interference caused by:
– disregarding the operating instructions
– unauthorized modifications to the controller
– Operating errors
– improper working on and with the controller
Warranty • Warranty conditions: see Sales and Delivery Conditions of Lenze GmbH & Co KG.
• Warranty claims must be made to Lenze immediately after detecting the deficiency or fault.
• The warranty is void in all cases where liability claims cannot be made.
Disposal
Material recycle dispose
Metal D -
Plastic D -
Assembled PCBs - D
To Next Page
Loading...
Need help?
General