Technical data
3-1
L MA9300PLC EN 1.4
3 Technical data
3.1 Features
• Suitable for the following motors (with corresponding power)
– Synchronous servo motors
– Asynchronous servo motors
– Asynchronous servo motors
• Resolver feedback (factory setting)
• Encoder feedback
– Incremental encoder TTL
– Sin/cos encoder
– Sin/cos encoder with serial communication (single turn)
– Sin/cos encoder with serial communication (multi turn)
• Single axis in narrow design
– space-saving installation
• Power range: 370 W to 75 kW
– Uniform control module and thus uniform connection for the control cables over the
complete power range.
• Heat sink can be separated
– Cooling is possible outside the control cabinet
(punching or ”Cold Plate”)
• Power connections from the top (supply) or from the bottom (motor)
– simple connection for multi-axis applications
• Direct connection of resolver or encoder feedback
– Easy connection because of prefabricated system cables (accessories)
– Connecting cables can be plugged
• Programmable user configuration through the Lenze ’Drive Developer Studio’ (DDS) based on
IEC 1131-3.
• System bus (CANopen) for
– communication with DDS and GDC
– the expansion of the controller terminals by means of decentralized inputs and outputs
– the connection of a hand terminal or a keypad
– for diagnostics and optimization
– the connection of other controllers
• Integrated automation interface for fieldbus systems such as
–INTERBUS
–PROFIBUSetc.
• Approval of standard devices UL 508, File No. 132659 (listed)
• Approval 9371 BB (BAE) UL 508, File No. 132659 (listed)
To Next Page
Loading...
Need help?
General