Brake switches
For switching an electromechanical brake.
The brake switch consists of a recer and an electronic circuit breaker.
It is mounted on the control cabinet plate by means of two screws. Control is performed using
a digital output on the inverter.
Brake switches Half-wave recers Bridge recers
Order code E82ZWBRE E82ZWBRB
Input voltage V AC 320 - 550 AC 180 - 317
Output voltage V DC 180 (with AC 400)
DC 225 (with AC 500)
DC 205 (with AC 230)
Max. brake current A 0.61 0.54
Accessories
Brake switches
248
To Next Page
Loading...
