Lenze i950 - Mounting

Mounng
Shield mounng kit
Mot
or cable
If the shielding of the motor cable is centrally connected to an earthing busbar in the control
cabinet, no shielding is required.
For a direct connecon of the shielding of the motor cable to the inverter, the oponally
available accessories can be used consisng of shield sheet and xing clips or wire clamps.
From 22 kW onwards, the shield sheet is integrated.
Inverter Shield mounng kit
Order code Packaging unit Order code Packaging unit
Unit Unit
i950-C0.55/400-3
EZAMBHXM018/M
5x motor shield plate
5x xing clip
5x wir
e clamp (cable diameter 0.157 ...
0.591 in ( 4 ... 15 mm))
EZAMBHXM018/S
1x motor shield plate
1x xing clip
1x wire clamp (cable diameter 0.157 ...
0.591 in ( 4 ... 15 mm))
i950-C0.75/400-3
i950-C2.2/400-3
i950-C4.0/400-3
i950-C7.5/400-3
EZAMBHXM016/M
5x motor shield plate
5x xing clip
5x wire clamp (cable diameter 0.394 ...
0.787 in ( 10 ... 20 mm))
5x M4x12 screw
EZAMBHXM016/S
1x motor shield plate
1x xing clip
1x wire clamp (cable diameter 0.394 ...
0.787 in ( 10 ... 20 mm))
1x M4x12 screw
i950-C11/400-3
i950-C15/400-3
i950-C22/400-3 EZAMBHXM004/M 10x wire clamp (cable diameter 0.591 ...
1.102 in ( 15 ... 28 mm))
- -
i950-C30/400-3
EZAMBHXM004/M
10x wire clamp (cable diameter 0.591 ...
1.102 in ( 15 ... 28 mm))
EZAMBHXM005/M
10x wire clamp (cable diameter
0.787 ... 1.457 in ( 20 ... 37 mm))
i950-C45/400-3
i950-C55/400-3
EZAMBHXM004/M
10x wire clamp (cable diameter 0.591 ...
1.102 in ( 15 ... 28 mm))
EZAMBHXM005/M
10x wire clamp (cable diameter
0.787 ... 1.457 in ( 20 ... 37 mm))
i950-C75/400-3
i950-C90/400-3
- - - -
i950-C110/400-3
Accessories
Mounng
Shield mounng kit
166