Lenze i950 - Motor Connection

Motor c
onnecon
Switching in the motor cable
Switching on the motor side of the inverter is permissible:
F
or safety shutdown (emergency stop).
In case several motors are driven by one inverter (only in V/f operang mode).
Please note the following:
The switching elements on the motor side must be dimensioned for with the
maximum occurring load.
Motor cable lengths
•
The r
ated data for the motor cable length must be observed.
•
Keep the motor cable as short as possible as this has a posive eect on the drive
behaviour and the EMC.
Informaon on electric
al installaon
Motor connecon
49