Product description
Product features
3
13
EDS82ZAFPC010 EN 4.0
3.3 Product features
ƒ Interface module for the PROFIBUS communication system which can be connected
to the AIF slots of the Lenze 8200 vector, 8200 motec and starttec device series.
ƒ Support of the PROFIBUS−DP−V0 communication profile
ƒ Drive profile:
– DRIVECOM profile "Drive technology 20" (can be switched off)
ƒ Support of I&M0 functionality for standard device identification
ƒ Automatic detection of the baud rate (9.6 kbps ... 12 Mbps)
ƒ External 24V supply for maintaining the PROFIBUS network when the standard
device fails
ƒ DIP switch for activating the bus terminating resistor
ƒ LED status displays:
– Voltage supply for function module
– Connection between the function module and the PROFIBUS network
– Connection between the function module and the standard device
To Next Page
Loading...
