Lenze L-force PROFIBUS-DP - Setting the Node Address

Commissioning
Setting the node address
6

41
EDS82ZAFPC010 EN 4.0
6.5 Setting the node address
To address the basic devices, each device (station) is allocated a different node address in
the PROFIBUS−DP network.
Valid address range: 3  126
(Lenze setting: 3)
The node address can be selected freely via code C1509.
It can be set with
ƒ the keypad,
ƒ the PC / communication module, type 2102 LECOM, or
ƒ the class 2 master.