Lenze L-force PROFIBUS-DP - Communication Time

Technical data
Communication time
4

18
EDS82ZAFPC010 EN 4.0
4.5 Communication time
The communication time is the time between the start of a request and the arrival of the
corresponding response.
The communication times depend on ...
ƒ the processing time in the controller
ƒ the transmission delay time
– the baud rate
– the telegram length
Processing time 8200vector / 8200motec / starttec
There are no interdependencies between parameter data and process data.
ƒ Parameter data: approx. 30 ms + 20 ms tolerance
ƒ Process data: approx. 3 ms + 2 ms tolerance