Codes
Overview
10
70
EDS82ZAFPC010 EN 4.0
How to read the code table
Column Meaning
Code
(Lenze) code
l The parameters of a configurable code marked with an asterisk (<Code>*) can only be accessed
via the communication module.
l The value of a configurable code marked with a double asterisk (<Code>**) is not transmitted
with the parameter set transfer.
Subcode Subcode
Name Designation of the Lenze code
Index Index under which the parameter is addressed.
Lenze
Lenze setting of the code
Display code
Configuration of this code is not possible.
Values
Fixed values determined by Lenze (selection list) or a value range:
Minimum value [Smallest increment/unit] Maximum value
Access R = read access (reading permitted)
W = write access (writing permitted)
Data type l FIX32: 32−bit value with sign; decimal with 4 decimal positions
l U16: 2 bytes bit−coded
l U32: 4 bytes bit−coded
l VS: visible string, character string with defined length
To Next Page
Loading...
Need help?
General
