Leroy-Somer DIGIDRIVE SE2.5T User Manual

Installation and commissioning
DIGIDRIVE
Variable speed drive
54
Réf. 3218 GB - 4.33 / d - 02.02
LEROY-SOMER
4.6.3 - Deleting a security code
Selection of parameter 10.
Action Display Comment
Power-up
Drive locked
Selection of parameter 25.
CAUTION:
It is not possible to access parameter 25
until 10 has been set to L2 (see procedure in
section 4.4.3)
Enter the security code (see procedure in
section 4.6.2).
Its value is always L2.
Select the value " LoC " to enable the procedure
for deleting the security code.
M
M
1x
M
3x
M
M
M
The parameters can only be accessed in read
mode.
Parameter setting can now be accessed.
Deletion of security code.
(Each time the key is pressed, the displays
change state).
1x
1x
Return to the initial drive status.
The security code is deleted. Parameter 10
automatically returns to value L1.
M
1x
M
1x
M
1x
Parameters 01 to 10 can be accessed.
To access the other parameters, 10 must be
set to L2.

Leroy-Somer DIGIDRIVE SE2.5T Specifications

General

Brand	Leroy-Somer
Model	DIGIDRIVE SE2.5T
Category	Inverter
Language	English