Leuze electronic MLC 520 - Page 55

Technical data
Leuze electronic MLC 520 55
B
M12
A
R
R
C
2
9
3
5
,
4
H
PFN
Fig.14.1: Dimensions of transmitter and receiver
Effective protective field heightH
PFE
goes beyond the dimensions of the optics area to the outer borders of
the circles labeled with R.
Calculation of the effective protective field height
H
PFE
[mm] = Effective protective field height
H
PFN
[mm] = Rated protective field height, this corresponds to the length of the yellow housing part (see ta-
bles below)
A [mm] = Total height
B [mm] = Additional dimensions for calculation of the effective protective field height (see table below)
C [mm] = Value for calculating the effective protective field height (see tables below)
Tab.14.7: Additional dimensions for calculating the effective protective field height
R=resolution B C
14mm 6mm 6mm
20mm 7mm 10mm
30mm 19mm 9mm
40mm 25mm 15mm
90mm 50mm 40mm
Tab.14.8: Dimensions (nominal protective field height), weight and response time
Device type Transmitter and receiver Receiver
Dimensions [mm] Weight [kg] Response time [ms] acc. to resolution
Model H
PFN
A 14mm 20mm 30mm 40mm 90mm
MLC…-150 150 216 0.30 5 4 3 3 -
MLC…-225 225 291 0.37 - 5 3 3 -
MLC…-300 300 366 0.45 8 7 4 4 -
MLC…-450 450 516 0.60 11 9 5 5 3