Leuze electronic SD4T 14 - SOLID-4 Safety Light Curtains with a Resolution of 14 MM to 40 MM; SOLID-4 Safety Light Curtains with a Resolution of ≥ 40 MM

Safety
Leuze electronic SOLID-4 13
TNT 35/7-24V
DEUTSCHENGLISHFRANÇAISITALIANOESPAÑOLNEDERLANDS
2.5 SOLID-4 Safety Light Curtains with a resolution of 14 mm to 40 mm
are used for point of operation guarding, preferably in a vertical position.
(See Fig. 6.1-1). Depending on the resolution selected, they can detect:
Warning!
Safety Light Curtains with > 40 mm resolution are not suitable for protection of points of
operation
for which finger, hand or arm resolution is required.
2.6 SOLID-4 Safety Light Curtains with a resolution of ≥ 40 mm
are preferably used for danger zone guarding (see Fig. 6.1-2). Predominantly in a
horizontal position, the presence of
people within the protective field is continuously
monitored.
Note!
As an alternative to horizontal installation of Safety Light Curtains for danger zone
guarding, a
Safety Laser Scanner with configurable protective field can be used if safety
category 3/PL d acc. to ISO 13849 is sufficient (information on ROTOSCAN Safety Laser
S
c
anners can be obtained via our branch offices and partners or at www.leuze.de).
Device type Resolution Detection with
persons age
14
and over
Range Preferred area of
application
SD4T 14-.. /
SD4R 14-..
14 mm F
inger 0.3 to 6 m Point of operation
guarding
SD4T 20-.. /
SD4R 20-..
20 mm Hand 0.
7 to 14 m Point of operation
guarding
SD4T 30-.. /
SD4R 30-..
30 mm Hand 0.
5 to 9 m Point of operation
guarding
SD4T 40-.. /
SD4R 40-..
40 mm Arm 0.
9 to 20 m Point of operation
guarding
Table 2.5-1: SOLI
D-4 Safety Light Curtains for point of operation guarding
Device type Resolution Detection with
persons age
14
and over
Range Preferred area of
application
SD4T 40-.. /
SD4R 40-..
40 mm F
rom the feet
upwards
0.9 to 20 m Danger zone
guarding
SD4T 90-.. /
SD4R 90-..
90 mm F
rom the thigh
upwards
0.9 to 20 m Danger zone
guarding
Table 2.6-1: SOLI
D-4 Safety Light Curtains for danger zone guarding