Leuze electronic SD4T 14 - 7-Segment Display; LED Displays

Display elements
Leuze electronic SOLID-4 25
TNT 35/7-24V
DEUTSCHENGLISHFRANÇAISITALIANOESPAÑOLNEDERLANDS
5.3.1 7-segment display
After switching-on the supply voltage, the following data appears on the 7-segment display
of the receiver:
5.3.2 LED displays
Notice!
If all LED displays are simultaneously in the O
FF state, no supply voltage is present.
7-segment display Meaning
8. Hardware reset at the moment of turn-on
S Self test running (for approx. 1.5 sec)
1 Normal operation, channel 1
F = device fault
x = fault number; display alternates between this and "F"
1 or 2 flashing Flashing number of the transmission channel → weak
signal,
de-
vice not optimally aligned or dirty
Table 5.3-1: 7-segment
display receiver SD4R
LED Color Meaning
LED1 red RED = OSSD safety outputs in the OFF state
LED1 green GREEN = OSSD safety outputs in the ON state
Table 5.3-2: LED displays –
r
eceiver SD4R
F
x