Leuze BPS 8 - Connection via MA 8-01;MA 8-02 Units

Device parameters and interfaces Leuze electronic
54 BPS 8 Leuze electronic
8.1.6.2 Position Logging
Figure 8.8: Position Logging tab
Description:
The position logging controls all settings that affect the position values.
Parameters
With the Resolution Host parameter, the resolution for the position values is defined. This
parameter also performs a rounding correction (the position value is divided by the defined
value range).
Notice!
The resolution only determines the mathematical decimal value and has no effect on the
measurement accuracy.
Parameter Description Value range Default Unit CR
Resolution Host
in [mm]
The parameter specifies the
resolution for the position value.
The resolution has no effect on
- Static preset
- Offset.
1: 0.01
2: 0.1
3: 1
4: 10
5: 100
6: 1'000
3 mm –
a