If you want to expand to allow in more viewers, the host server should be able
to handle large network traffic, which must handle the picture refreshing
from the Network Camera.
If the web space has FTP service,
Set the Network Camera as an FTP client to upload the pictures. The access to
the Network Camera will be independent of the number of viewers and the
picture quality will remain constant.
1. Click on “Configuration” on homepage,
2. Click on “Network” at the left column,
3. Fill the FTP related settings including server, user name and password, as
well as the upload path if specified by the web space,
4. Click on save and wait for system restart,
5. Click on “Application” at the left column,
6. Select “Sequential operation” and set the interval,
7. Select FTP without date time suffix as the upload method and click on save,
8. The image file uploaded to the web space is named “video.jpg”. Check if the
file is successfully uploaded to the correct folder,
9. Prepare a homepage with the embedded image reference to the image file
uploaded via FTP in advance.
If the web space has no FTP service,
An auto-refresh homepage can be used to periodically poll the newest image
from the Network Camera. It is most efficient if using a free web space
provider as the FTP service may be limiting.
1. Prepare an auto-refresh homepage like the following example. The URL of
image is http://“IP address of the Network Camera”/cgi-bin/video.jpg.
Modify the IP address according to your Network Camera. Define the refresh
interval according to your network bandwidth for best result. If the refresh
rate is too fast and there is a large number of visitors, this may overload the
Network Camera and slows the response.
To Next Page
Loading...
Need help?
General
