C. URL commands of the Network Camera
For some customers who already have their own web site or web control
application, the Network Camera can be easily integrated through convenient
URLs. This section lists the commands in URL format corresponding to the
basic functions of the erase Network Camera.
Capture update Snapshot of JPEG image
/cgi-bin/video.jpg?size=<value>
The Network Camera will return the most up-to-date snapshot in JPEG format.
The value of size can be 1, 2 and 3. 1 means half, 2 means normal and 3 means
double. If users do not set the size in this command, the snapshot size will be
the same as the setting of video option.
Query status of the digital input
/cgi-bin/getdi.cgi
The Network Camera will return the status of digital input.
Drive the digital output
/cgi-bin/setdo.cgi?do=<state>
The state is either “H”, or “L”.”H” means high, that is NC is connected with
COMMON and “L” means low that is NO is connected with COMMON.
For instance, typing http://192.168.0.201/cgi-bin/setdo.cgi?do=h
in the
address bar of the web browser will command the Network Camera, with IP
address of 192.168.0.201, to set digital output to connect to NC with
COMMON.
To Next Page
Loading...
Need help?
General
