zone setting.
Q Can I install it on ceiling?
A Yes. There are flip and mirror options in video configuration page to correct
the images for upside down installation.
Q The image is not clear enough.
A Rotate the lens to adjust the focus after the Network Camera is installed in
the proper position. The image settings and white balance can be fine tuned
to achieve the best visual effect. Also notice the power line frequency must
match the local utility to synchronize and minimize the effect of flickering
florescent lights.
Q Why does the image not refresh regularly?
A Some anti-virus programs filter the received web content. It takes time to
perform data examination and affect the streaming application such as the
Network Camera. However it only affects the HTP mode of the Network
Camera. If the network allows only HTTP mode, disable the web filtering
function of the anti-virus program temporarily. During the period, users
should be aware of the risk of malicious network activity.
Q I have opened motion detection windows but it cannot work.
A If the motion detection windows are setup and names are given, check to
see if the function is checked at the first line. While it is enabled, adjust the
sensitivity and percentage to monitor the level indicator for best results.
Q I cannot hear any sound while watching.
A If there is "V_ONLY" shown above the image, click on connection type to
uncheck "Disable audio". If there is "V" shown instead of "AV", the sound
card in your PC may not properly installed. If "AV" is shown, check the audio
source of the Network Camera.
Q How many users are allowed to watch the Network Camera at the same
time?
A Too many users requesting the real-time multimedia content will jam the
network. For best results, the Network Camera is designed to accommodate
To Next Page
Loading...
Need help?
General
