41
12.2 Date and Time
Manual : Manually enter the date and time.
Clone from PC : The camera will sync with the time and date of the computer. Check "Clone" to utilize
this option. The read-only date and time of the PC is displayed as updated.
NTP : (Network Time Protocol) - NTP is a protocol for synchronizing the clocks of a computer system.
Select to update the time with a NTP server on an hourly, daily, weekly, or monthly basis.
Time Zone : Select the preferred time zone from the drop-down menu.
NTP Server 1 and Server 2: Enter the address of the NTP server.
Daylight Saving: Enable this option to automatically update Daylight Saving Time changes.
Click Apply or Cancel to take effect.
To Next Page
Loading...
