NVR-02 Series User Manual
Perform PTZ Preset Viewing
There are three functions provided in the “Preset” section:
• Perform preset point viewing of a particular camera
• Auto pan a particular camera
• Perform preset point sequence viewing
(In order to use this function, one must configure camera's preset
points in "NVR Setup" >> "Channel Configurations" >> "PTZ Preset"
first)
Preset Point Viewing
Start by selecting a PTZ camera from the drop-down list.
Its available PTZ preset points will be listed in the dropdown
list shown below:
Select a preset position from the drop-down list and click "Go to" to
move the live view to that position.
To Next Page
Loading...
