Chapter 6 Status Page 53
Chapter 7 Status
View Basic Information
Open “Information” in “Status” to check the basic information of the CPE, which is read only.
Information includes system information, LAN settings, wireless setting and interface status. Click
“Refresh” at the bottom to have the real-time information.
Figure 50 Basic Information
View Association List
Open “Connections” in “Status” to check the information of associated wireless devices such as MAC
address, signal strength, connection time, IP address, etc. All is read only. Click “Refresh” at the
bottom to update the current association list.
To Next Page
Loading...
