Printing
3 Push down the bottom plate until it locks into place.
4 Prepare the print media for loading.
• Flex paper or fan envelopes back and forth. Do not fold or crease the paper. Straighten the
edges on a level surface.
• Hold transparencies by the edges and avoid touching the print side. Fan the stack of
transparencies to prevent jams. Be careful not to scratch or leave fingerprints on the
transparencies.
5 Load one type of print media in the multipurpose feeder. Do not mix types. Click a topic for
loading instructions:
• Loading paper, transparencies, labels, and card stock
• Loading envelopes
• Loading letterhead
Loading the multipurpose feeder
20
To Next Page
Loading...
