Printing
• Loading paper, transparencies, labels, and card stock
a Load paper, transparencies, labels, and card stock in the center of the tray with the
recommended print side face up.
b Continue with step 6.
Loading envelopes
a Load envelopes flap side down, with the flap closed, and with the return address area on
the right. Orient the envelopes so that the edge with the return address and stamp area
will enter the multipurpose feeder last.
Warning: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-
stick adhesives. These envelopes may severely damage the printer.
Note: If envelopes jam while printing, try reducing the number of envelopes in the
multipurpose feeder.
b Continue with step 6.
Loading the multipurpose feeder
21
To Next Page
Loading...
Need help?
General
