Lexmark CS510de - Using the Embedded Web Server

1
2
1
2
1
2
3
4
56
3
4534
1 Printer control panel
2 Standard bin
3 250-sheet tray (Tray 1)
4 Manual feeder
5 Optional 650-sheet duo tray with integrated multipurpose feeder (Tray 2)
Note: This tray is standard on the CS410dtn and CS510dte models.
6 Optional 550-sheet tray (Tray 3)
Using the Embedded Web Server
Note: This feature is available only in network printers or printers connected to print servers.
If the printer is installed on a network, then you can use the Embedded Web Server to do the following:
• View the virtual display of the printer control panel.
• Check the status of the printer supplies.
• Configure supply notifications.
• Configure printer settings.
• Configure network settings.
• View reports.
To access the Embedded Web Server for your printer:
1 Obtain the printer IP address:
• From the TCP/IP section in the Network/Ports menu
• By printing a network setup page or menu settings page, and then finding the TCP/IP section
Notes:
– An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Learning about the printer 12