Paper menu
Default Source menu
Use To
Default Source
Tray [x]
Multipurpose Feeder
Manual Paper
Manual Envelope
Set a default paper source for all print jobs.
Notes:
• Tray 1 (standard tray) is the factory default setting.
• From the Paper menu, set Configure MP to "Cassette" for Multipurpose
Feeder to appear as a menu setting.
• If two trays contain paper of the same size and type, and the trays have
the same settings, then the trays are automatically linked. When one tray
is empty, the print job continues using the linked tray.
Paper Size/Type menu
Use To
Tray [x] Size
A4
A5
JIS‑B5
Letter
Legal
Executive
Oficio (Mexico)
Folio
Universal
Specify the size of the paper loaded in each tray.
Note: Letter is the U.S. factory default setting. A4 is the international factory
default setting.
Tray [x] Type
Plain Paper
Card Stock
Transparency
Recycled
Glossy
Labels
Bond
Letterhead
Preprinted
Colored Paper
Light Paper
Heavy Paper
Rough/Cotton
Custom Type [x]
Specify the type of the paper loaded in each tray.
Notes:
• Plain Paper is the factory default setting for Tray 1. Custom Type [x] is
the factory default setting for all other trays.
• If available, a user‑defined name will appear instead of Custom Type [x].
• Use this menu to configure automatic tray linking.
• Only the 250-sheet tray supports transparency.
Note: Only installed trays and feeders are listed in this menu.
Understanding the printer menus 72
To Next Page
Loading...
