Lexmark Dot Matrix Compatibility Guide

Card stock Width: 210–216 mm (8.3–8.5 in.)
Length: 279–356 mm (11–11.7 in.)
Weight:
Up to 163 g/m
2
Lexmark W820
Limit label printing to occasional use of A4‑ or letter‑size paper office labels designed for laser printers. We do not
recommend using vinyl or polyester labels.
The Lexmark W820 supports stocks up to 163 g/m
2
. Always feed labels and card stock from Tray 1, 2, or 3, each of
which can hold up to 250 sheets of labels or card stock.
The following table lists the maximum weights supported by the trays and the multipurpose feeder.
Overview of card stock and label support
Paper source Media types Weight
Tray 1 Paper, Bond, Card stock, Labels, Transparencies
60–163 g/m
2
Trays 2, 3 Paper, Bond, Card stock, Labels
60–163 g/m
2
Trays 4, 5 Paper, Bond
60–105 g/m
2
Multipurpose Feeder Paper, Bond, Card stock, Labels, Transparencies, Envelopes
120–128 g/m
2
For paper and transparency specifications, see the printer publications CD.
Media specifications
Labels Width: 210–216 mm (8.3–8.5 in.)
Length: 279–356 mm (11–11.7 in.)
Weight:
120–128 g/m
2
Thickness: 0.13–0.20 mm (0.005–0.008 in.)
Smoothness: 100–400 Sheffield*
* 150–250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock Width: 210–216 mm (8.3–8.5 in.)
Length: 279–356 mm (11–11.7 in.)
Weight:
Up to 163 g/m
2
Printer specifications 108

Lexmark Dot Matrix Specifications

General

Brand	Lexmark
Model	Dot Matrix
Category	All in One Printer
Language	English