Media specifications
Labels Width: 210–216 mm (8.3–8.5 in.)
Length: 279–297 mm (11–11.7 in.)
Weight:
Up to 90 g/m
2
(24 lb)
Thickness: Up to 0.25 mm (0.01 in.)
Smoothness: 100–200* Sheffield
*150–200 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock Weight:
Up to 163 g/m
2
Index Bristol (90 lb)
Up to 163 g/m
2
Tag (100 lb)
Note: To minimize curl, use the rear exit when printing on card stock and labels.
For more information, see “Maintenance procedures” on page 14.
Lexmark E320, E322
Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using
vinyl or polyester labels.
The Lexmark E320 and Lexmark E322 support stocks up to 163 g/m
2
(43 lb). The automatic paper feeder can hold up
to 10 sheets of card stock or labels.
The following table lists the maximum weights supported by Tray 1 and the manual sheet feeder.
Overview of card stock and label support
Paper source
Card stock Labels
Index Bristol Tag Cover Paper Vinyl
Tray 1
163 g/m
2
163 g/m
2
—
163 g/m
2
—
Manual feed
163 g/m
2
163 g/m
2
—
163 g/m
2
—
For paper and transparency specifications, see the Lexmark E320/E322 Publications CD.
Printer specifications 75
To Next Page
Loading...
Need help?
General
