Lexmark X203n and X204n
Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend printing
more than 20 pages of labels a month. For best results, feed labels from the paper tray.
The Lexmark X203n and X204n printer models support stocks up to 90 g/m
2
(24 lb).
Note: The smallest supported Universal size is 76 x 127 mm (3 x 5 in.); the largest is 216 x 356 mm (8.5 x 14 in.).
The following table lists the maximum weights supported by the paper tray and the manual feeder.
Overview of card stock and label support
Paper source
Card stock Labels
Index Bristol Tag Cover Paper
Paper tray
163 g/m
2
163 g/m
2
—
163 g/m
2
Manual feeder
163 g/m
2
163 g/m
2
—
163 g/m
2
Note: The manual feeder can feed only one sheet at a time.
Media specifications
Labels Width: 210–216 mm (8.3–8.5 in.)
Length: 216–356 mm (8.5–14 in.)
Weight:
Up to 163 g/m
2
(43 lb)
Thickness: Up to 0.25 mm (0.01 in.)
Smoothness: 100–300* Sheffield
* 150–200 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock Weight:
Up to 163 g/m
2
Index Bristol (90 lb)
Up to 163 g/m
2
Tag (100 lb)
When printing on labels:
• Use labels only in the paper tray or manual feeder. Do not use labels in the ADF.
• Do not use labels with slick backing material.
Printer specifications 113
To Next Page
Loading...
Need help?
General
