Lexmark X940 and X945
Limit label printing to occasional use of A4‑ or letter‑size paper office labels designed for laser printers. We do not
recommend using vinyl or polyester labels.
Lexmark X940 and X945 support stocks up to 220 g/m
2
. Always feed labels and card stock from Tray 1, 2, or 3. We
recommend printing on grain long card stock.
The following table lists the maximum weights supported by the trays and the multipurpose feeder.
Note: Scanning large quantities of labels is not recommended.
Overview of card stock and label support
Tray 1 Tray 2 and 3 Multipurpose feeder
Labels
105 g/m
2
220 g/m
2
220 g/m
2
Card stock
105 g/m
2
220 g/m
2
220 g/m
2
Media specifications
Labels Width: 210–216 mm (8.3–8.5 in.)
Length: 279–356 mm (11–11.7 in.)
Weight:
120–128 g/m
2
Thickness: 0.13–0.20 mm (0.005–0.008 in.)
Smoothness: 100–400 Sheffield*
* 150–250 Sheffield is optimal. Using media higher than 300 Sheffield could result in print quality
degradation.
Card stock Width: 210–216 mm (8.3–8.5 in.)
Length: 279–356 mm (11–11.7 in.)
Weight:
Up to 220 g/m
2
Printer specifications 149
To Next Page
Loading...
Need help?
General
