Lexmark E210 - Blank Page Printout (2); Repeated Marks or Voids down Page

2-6 Service Manual
4510-001
Blank Page Printout (2)
Description:
1. Blank page is printed.
2. One or several blank pages are printed.
3. When the printer turns on, several blank
pages print.
Possible causes:
• Bad or dirty high voltage contacts
• Pick solenoid failure
• Main board failure
Repeated marks or voids down page
Distance
Between
Repeated
Mark
Related Printer
Components
Action
27 mm Supply Roller Replace Toner Cartridge
32 mm Develop Roller Replace Toner Cartridge
37 mm Charge Roller Replace Toner Cartridge
47 mm Transfer Roller Replace Transfer Roller
58 mm Fuser Hotroll Replace Fuser
60 mm Fuser Backup Roll Replace Fuser
75 mm OPC Drum Replace Toner Cartridge