Lexmark E210 Service Manual

Diagnostic Aids 2-7
4510-001
Paper Feed
Printing in wrong position
Paper stopping, jamming, or feeding multiple sheets
Step
Printing begins at the
wrong position on
the paper
Yes No
1 Check for obstructions
in the input tray that
could cause incorrect
feeding. Are there
obstructions?
Remove the
obstructions
Go to step 2
2 Check the paper
present actuator for
binds. Is it binding?
Correct the
binding problem
Replace the paper
present actuator
Step
Paper stops or jams
at various points in
the printer or feeds
multiple sheets
Yes No
1 Does the paper exit the
input tray? See “Paper
Path Jam 0” on
page 2-9.
Go to step 2 Go to step 4
2 Does the paper stop
just after exiting input
tray? See “Paper Path
Jam 1” on page 2-9.
Go to step 8 Go to step 3
3 Is the paper jammed in
front of or just inside
the fuser? See “Paper
Path Jam 2” on
page 2-10.
Go to step 9 Go to step 7
4 Check for obstructions
in the input tray. Are
there obstructions?
Remove
obstructions
Go to step 5

Lexmark E210 Specifications

General

Brand	Lexmark
Model	E210
Category	Printer
Language	English