Setting Value
Device UserID Yo u r e ‑mail address
Device Password Authorization code
Note: To generate an authorization code, from the QQ Mail home page, click
Settings > Account, and then from the
POP3/IMAP/SMTP/Exchange/CardDAV/CalDAV Service section, click
Generate authorization code.
Sina Mail
Note: Make sure that the POP3/SMTP service is enabled on your account. To enable the service, from the
Sina Mail home page, click Settings > More settings > User‑end POP/IMAP/SMTP, and then enable
POP3/SMTP service.
Setting Value
Primary SMTP Gateway smtp.sina.com
Primary SMTP Gateway Port 587
Use SSL/TLS Required
Require Trusted Certificate Disabled
Reply Address Your e ‑mail address
SMTP Server Authentication Login / Plain
Device‑Initiated E‑mail Use Device SMTP Credentials
Device UserID Yo u r e ‑mail address
Device Password Authorization code
Note: To create an authorization code, from the e‑mail home page, click
Settings > More settings > User‑end POP/IMAP/SMTP, and then enable
Authorization code status.
Sohu Mail
Note: Make sure that the SMTP service is enabled on your account. To enable the service, from the Sohu
Mail home page, click Options > Settings > POP3/SMTP/IMAP, and then enable either IMAP/SMTP service
or POP3/SMTP service.
Setting Value
Primary SMTP Gateway smtp.sohu.com
Primary SMTP Gateway Port 465
Use SSL/TLS Required
Require Trusted Certificate Disabled
Reply Address Your e ‑mail address
SMTP Server Authentication Login / Plain
Device‑Initiated E‑mail Use Device SMTP Credentials
Device UserID Yo u r e ‑mail address
E-mailing 57
To Next Page
Loading...
Need help?
General
