Scanning to a Cloud Connector profile
This feature is available only in some printer models.
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Cloud Connector.
3 Select a cloud service provider, and then select a profile.
Note: For more information on creating a Cloud Connector profile, see “Creating a Cloud Connector
profile” on page 26.
4 Tou ch Scan, and then assign a filename and destination folder.
5 Tou ch Scan Here.
If necessary, change the scan settings.
6 Scan the document.
Scanning 78
To Next Page
Loading...
