Lexmark MC2425 User Manual

Printer model Analog fax
etherFAX
1
Fax server
Fax over IP (FoIP)
2
XC2235
XC4240
XC4240i
X
1
Needs a subscription. For more information, go to https://www.etherfax.net/lexmark or contact the place where
you purchased the printer.
2
Needs an installed license bundle. For more information, contact the place where you purchased the printer.
Setting up the fax function using analog fax
Notes:
• This feature is available only in some printer models.
• Some connection methods are applicable only in some countries or regions.
• If the fax function is enabled and not fully set up, then the indicator light may blink red.
• If you do not have a TCP/IP environment, then use the control panel to set up fax.
Warning—Potential Damage: To avoid loss of data or printer malfunction, do not touch cables or the printer
in the area shown while actively sending or receiving a fax.
Using the Settings menu in the printer
1
From the control panel, navigate to:
Settings > Fax > Fax Setup > General Fax settings
For non-touch-screen printer models, press
to navigate through the settings.
2
Configure
the settings.
Faxing 63

Lexmark MC2425 Specifications

General

Scan Type	Flatbed, ADF
Duplex Printing	Automatic
Display	4.3-inch color touch screen
Scan Resolution	Up to 600 x 600 dpi
Fax	Yes
Fax Transmission Speed	33.6 Kbps
Operating System Compatibility	Windows, Mac, Linux
Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Standard Connectivity	Ethernet, USB, Wi-Fi
Standard Paper Input	250 sheets
Maximum Paper Size	A4
Mobile Printing	Mopria, AirPrint
Memory	1024 MB