Lexmark MS71x - Technical Information: MX71 x;MX81 x; Specifications

Lexmark MS71x/MS81x & MX71x/MX81x Product Study Guide Rev 1.3
For Training Purposes Only 11/19/2012
24
Technical Information
Specifications: MX71x/MX81x
MX710
MX711
MX810
MX811
MX812
Performance
Fusing Technology
Belt Fuser
Print Engine
High-end, A4, Mono, Instant on fuser, 2-piece supplies (cartridge & IU)
Processor
800 MHZ Granite Processor
Memory
Memory Standard
1
512 MB
1 GB
Memory Max
2.56 GB
3 GB
Memory Options
1 GB and 2 GB SO-DIMMs available
204 pin, DDR3x32, SO-DIMM format
Hard Drive
Optional 160+ GB
(Standard on dhe & dthe)
Standard 160+ GB
Connectivity
Standard
10BASE-T / 100BASE-TX / 1000BASE –T
USB-B 2.0 high speed
USB - Front
Front USB-A 2.0 Host (low, full, high)
USB - Specialty
N/A
(1) USB-A 2.0 Host (low, full, high) in
output area for Card Reader
Option Slots
ISP Slots
(2) slots: 1-ISP, 1-hard drive
DIMM Slots
(1) slot for optional memory
eMMC Slot
(1) slot for optional Flash or DLE
Paper Handling
Paper Input (Standard)
550-Sheet Tray +
100-Sheet MPF
550-Sheet Trays (2) +
100-Sheet MPF
Paper Output (Standard)
550-Sheet Output Bin
1050-Sheets
(950 w/ Mailbox)
Duplex
Internal
Other
Paper Feed Orientation
Short Edge-A4/Letter, Long Edge Fed A5
Security Jumper
Yes
1
Standard memory is embedded on the controller board.