Lexmark MS71x - Fuser Maintenance Kit Life Messaging

Lexmark MS71x/MS81x & MX71x/MX81x Product Study Guide Rev 1.3
For Training Purposes Only 11/19/2012
72
Fuser Maintenance Kit Life Messaging
The following table provides the messaging that will appear on the control panel as Fuser Maintenance
Kit life becomes low.
Warning
Default
Setting
Default
Rating
Behavior Options
(default in Blue)
Control Panel Message
Nearly Low
Disabled
200K = 10%
Off
Warning
E-mail alert
Continuable stop
Non-continuable stop
"Maintenance kit nearly
low"
Low
Enabled
200K = 5%
Off
Warning
E-mail alert
Continuable stop
Non-continuable stop
"Maintenance kit low"
Near End of
Life
Enabled
200K = 1%
Off
Warning
E-mail alert
Continuable stop
Non-continuable stop
"Maintenance kit very low,
2000 estimated pgs
remain"
Pages remaining calculated
on the usage of the past
2000 pages printed
End of Life
Device Stops
Enabled
0%
Non-continuable stop
"Replace Maintenance kit,
0 estimated pgs remain"
Note: Counters for fuser maintenance kit alerts are based on counters stored in fuser chip.