Lexmark MS71x - MX710 Control Panel

Lexmark MS71x/MS81x & MX71x/MX81x Product Study Guide Rev 1.3
For Training Purposes Only 11/19/2012
59
MX710 Control Panel
Buttons and Functions: MX710
#
Part
When to Use
1
Home button
Go to the home screen.
2
Sleep button
Enable Sleep mode or Hibernate mode.
Do the following to wake the printer from Sleep mode:
 Press any hard button.
 Pull out Tray 1 or load paper in the multipurpose feeder.
 Open a door or cover.
 Send a print job from the computer.
 Perform a power‑on reset with the main power switch.
 Attach a device to the USB port on the printer.
3
Keypad
Enter numbers, letters, or symbols.
4
Start button
Start a job, depending on which mode is selected.
5
Clear All/ Reset button
Reset the default settings of a function, such as copying, faxing, or
scanning.
6
Cancel button
Cancel all printer activity.
7
Indicator light
Check the status of the printer.
8
USB Port
Connect a flash drive to the printer.
Note: Only the front USB port supports flash drives.
9
Display
 View the printer status and messages.
 Set up and operate the printer.