Lexmark MS71x User Manual

Lexmark MS71x/MS81x & MX71x/MX81x Product Study Guide Rev 1.3
For Training Purposes Only 11/19/2012
89
Configuration and Management
Category
POR Sequence
Description
2.4” Control Panel
and
Touchscreen
7 + 6 (letters S+M = Safe Mode)
 Safe Mode state will not disable on POR without holding
down the special button sequence.
 Safe Mode can co-exist with other POR button sequence
modes, such as Config and Diagnostics.
 Safe Mode can also be managed through the Config menu
via the Safe Mode menu. If the Safe Mode setting is
changed on this menu, the device must be PORed for the
new setting to take effect.
2-line Control Panel
STOP + BACK
LED models
(and all Control
Panels)
NPA command
 An NPA command can be issued to enable Safe Mode.
 If the Safe Mode setting is changed via NPA command, the
device must be PORed for the new setting to take effect.
Safe Mode Messaging
Category
Messaging
Description
2.4” Control Panel
and
Touchscreen
"The device is operating in Safe
Mode. Some print options may be
disabled or provide unexpected
results.”
 An intervention message will post at each POR once the
device is in Safe Mode.
 Priority 1 warning message will be displayed, toggling in
sequence with any other priority 1 warning messages, if
any are present.
 If the device is POR’ed into Diagnostics, Configuration or
SE menu, it will operate as if Safe Mode is disabled.
 A POR into any of these menus does not affect the Safe
Mode setting.
2-Line APA Control
Panel
“Safe Mode”…
 An intervention message will post at each POR once the
device is in Safe Mode.
 A warning with custom message will appear and toggle
with any other warning messages.

Lexmark MS71x Specifications

General

Brand	Lexmark
Model	MS71x
Category	Printer
Language	English