Lexmark MS71x/MS81x & MX71x/MX81x Product Study Guide Rev 1.3
For Training Purposes Only 11/19/2012
Key Updates: MS71x/MS81x & MX71x/MX81x
Separator Roller Assembly
This is a CRU maintenance item replacing the tray wear
strips (aka dimple dams).
A unique separator roll may be offered for challenging
media types via SPR.
Media is Reference Edge Fed
For the said printer models, the tray insert uses the lift plate
mechanism to elevate the media during paper transport.
The wear strips (aka dimple dams) is replaced with a new
FRU part called the separator roll assembly which is part of
the Maintenance Kit.
Media should be fed straight in - no longer slanted.
Input Tray Supports Envelopes and other media sizes*
Envelope and Universal Tray input options are no longer
supported for this printer series.
Input trays support almost all type of media.
*The MS71x DOES NOT support Envelopes – an Envelope
option is not in the menus.
2-Step Tray Insert Removal
Re-designed for user convenience.
There’s no need to completely remove the Tray Insert out
to load media.
To Next Page
Loading...
