Lexmark MS71x - Page 55

Lexmark MS71x/MS81x & MX71x/MX81x Product Study Guide Rev 1.3
For Training Purposes Only 11/19/2012
55
Indicator light
Indicates the printer status:
 Off – The power is off.
 Blinking green – The printer is warming up, processing data, or printing.
 Solid green – The printer is on, but idle.
 Blinking red – The printer requires user intervention.
Sleep button
Enables Sleep mode or Hibernate mode.
Light color and corresponding printer status:
 Off – The printer is idle or in Ready state.
 Solid amber – The printer is in Sleep mode.
 Blinking amber – The printer is waking from or entering Hibernate mode.
 Blinking amber for 0.1 second then goes completely off for 1.9 seconds
in pulsing pattern – The printer is in Hibernate mode.
Do the following to wake the printer from Sleep mode:
 Press any hard button.
 Pull out Tray 1 or load paper in the multipurpose feeder.
 Open a door or cover.
 Send a print job from the computer.
 Perform a power‑on reset (POR) with the main power switch.
 Attach a device to the USB port on the printer.
USB port
Connect a flash drive to the printer.
Note: Only the front USB port supports flash drives.