Lexmark MS71x/MS81x & MX71x/MX81x Product Study Guide Rev 1.3
For Training Purposes Only 11/19/2012
Below is a list of Hot Roll (HR) and Belt Fuser types. For the most current list of fuser Types and part
numbers, always refer to the printer’s Service Manual.
1
License Type: If the fuser has a Return license type that means the customer is under licensed agreement to return the fuser
once it is replaced. If the customer does not wish to accept this license agreement, unlicensed Fusers are available by
contacting Lexmark.
Note: The MS71x models have a Hot Roll Fuser similar to previous generations of workgroup mono products.
Note: The MS81x, MX71x and MX81x models have a Belt Fuser Only.
To Next Page
Loading...
